DeltaWASP -Whitepaper

DeltaWASP is the new line of clean design 3D printers. Hot pad, controlled temperature ambience and amortized bowden guarantee a controlled shrink of the material and better results in the final print.Accurate and reliable on all materials with pieces up to 40 cm in height with closed chamber and hot pad.

Accurate and reliable on all materials with pieces up to 40 cm,DeltaWASP 20 40 Turbo2 is the powerful, versatile and fastest delta 3D printer you need everyday.

DeltaWASP 20 40 Turbo2 is available in 2 versions:

 withSpitfire Red Extruder with Spitfire LT Cartridge with 0.4 mm diameter steel nozzle (*)

 withZEN Dual Extruder with 2 ZEN LT Cartridges with 0.4 mm diameter steel nozzle

 The DeltaWASP 20 40 Turbo2 with Red Spitfire Extruder is compatible with the Clay Kit 2.0 with the LDM Extruder for the printing of ceramic and fluid fluid materials.

With a new integrated 32bit board of industrial technology. It is presented with a supply system which can support 2 high power extruders. The new Turbo (Turbo 2) introduces a new carriage-sliding system improved in speed and accuracy. The room has been better insulated to reach temperature suitable with the fast 3d printing of technical materials – furthermore it has a cool system for the engines and the boards and a kinematics for high temperature. It’s introduced with the second optional extruder.

LDM WASP extruder for fluid-dense materials, easy ability to combine with all WASP 3D printers. Ideal for clay, ceramic, porcelain, allumina, zirconia and advanced ceramics. Developed to support digital craftsmanship and self productions.

Deltawasp 2040 Turbo 2 is :

 Rapid,precise and reliable with every material.

 Resurrection system to resume the Print in the event of Power Failure

 Suspended Bowden for excellent Print quality

 Changeable Nozzle

 Hot Chamber for uniform cooling

 Steel Base Plate

 Supports extruder for fluid-dense materials you can use clay, porcelain, etc.

 Industrial guides on aluminum slides for excellent motion control

Other enhancements:

 NEW BOARD OF INDUSTRIAL QUALITY, WITH WI-FI MODULE (COMPATIBLE WITH INDUSTRY

4.0 SUBSIDIES)

 NEW SLIDING-SYSTEM ON BEARINGS

 NEW MECHANICS OF HIGH TEMPERATURE RESISTANT ARMS

 ENGINE COOLING SYSTEM TO INCREASE PERFORMANCE

 SUSPENDED CUSHIONED BOWDEN

 END FILAMENT SENSOR

 FREE ZETA SYSTEM

How To Achieve Customer Satisfaction through Quality Management

How to achieve customer satisfaction through Quality Management

In this fierce competitive manufacturing environment, it has become crucial to strive hard in order to differentiate on customer experience. Hence quality has become the top priority of best-in-class companies to achieve that customer satisfaction and outdo their competition.
Here are some facts that highlight the importance of quality as adopted by best-in-class company

• The best in class companies spend 60% more on defect prevention
• 91% of the best in class companies believe that quality strategy is the top priority of the senior management
• Best-in-Class companies standardize the processes for managing quality across the enterprise.

To find out the right solution that will enable you to

• To achieve customer satisfaction through effective quality management
• To identify actual field failures and their impact on the safety of the environment
• To Effectively audit products and comply with ISO Standards

//www.slideshare.net/slideshow/embed_code/key/xAuUFkzZpNVdHl

IronCAD’s expands CAD Productivity

We’re excited to announce latest release of IronCAD 2018 Product Update #1.This update extends powerful functionality added in 2018 in addition to many usability improvements to increase design productivity in your design process.

The 3D CAD platform of choice among metal fabricators and custom machinery equipment manufacturers, IronCAD’s 2018 Product Update #1 adds features specifically designed to increase detailer productivity by streamlining the steps needed to move 3D designs into the 2D production drawings.

Since collaborative design workflows are critical for fabricators and machinery manufactures, IronCAD 2018 Product Update #1 also imports and exports to the latest native CAD formats, supporting collaboration between design groups that use different systems.

Key features of Product Update #1 including enhanced game-changing bulk drawing feature and a dramatically improved shrink wrap modeling simplification utility for more secure, more inclusive file sharing to support active collaboration.With the new process improvements for the bulk drawing creation, parts and assemblies can now be selected and can store predefined templates that automatically populate the bulk creation process. This stored information can be used in conjunction with IronCAD’s powerful Catalogs of pre-made designs, speeding up the reuse of existing designs and saving countless hours that might otherwise be spent preparing designs for detailing.

Product Update #1’s shrink wrap enhancements include more advance preparation options for packaging up designs and reducing outputted data such as shell representations of designs, supporting secure file sharing options for diverse use cases.

Continuing IronCAD’s reputation as the easiest-to-learn 3D CAD platform on the market, Product Update #1 also includes usability improvements such as:

Quick feature creation from existing geometry by simply pushing and pulling on face handles to create positive and negative shapes.

Streamlined interface that improves access and navigation to many common commands.

Simple reconnection tools that support IronCAD’s intelligent attachment capabilities making it easy to relocate connected elements.

For a full list of IronCAD 2018 Product Update #1’s new features, visit www.ironcad.com/blog/ironcad-2018pu1

IronCAD’s expands CAD Productivity

We’re excited to announce latest release of IronCAD 2018 Product Update #1.This update extends powerful functionality added in 2018 in addition to many usability improvements to increase design productivity in your design process.

The 3D CAD platform of choice among metal fabricators and custom machinery equipment manufacturers, IronCAD’s 2018 Product Update #1 adds features specifically designed to increase detailer productivity by streamlining the steps needed to move 3D designs into the 2D production drawings.

Since collaborative design workflows are critical for fabricators and machinery manufactures, IronCAD 2018 Product Update #1 also imports and exports to the latest native CAD formats, supporting collaboration between design groups that use different systems.

Key features of Product Update #1 including enhanced game-changing bulk drawing feature and a dramatically improved shrink wrap modeling simplification utility for more secure, more inclusive file sharing to support active collaboration.With the new process improvements for the bulk drawing creation, parts and assemblies can now be selected and can store predefined templates that automatically populate the bulk creation process. This stored information can be used in conjunction with IronCAD’s powerful Catalogs of pre-made designs, speeding up the reuse of existing designs and saving countless hours that might otherwise be spent preparing designs for detailing.

Product Update #1’s shrink wrap enhancements include more advance preparation options for packaging up designs and reducing outputted data such as shell representations of designs, supporting secure file sharing options for diverse use cases.

Continuing IronCAD’s reputation as the easiest-to-learn 3D CAD platform on the market, Product Update #1 also includes usability improvements such as:

Quick feature creation from existing geometry by simply pushing and pulling on face handles to create positive and negative shapes.

Streamlined interface that improves access and navigation to many common commands.

Simple reconnection tools that support IronCAD’s intelligent attachment capabilities making it easy to relocate connected elements.

For a full list of IronCAD 2018 Product Update #1’s new features, visit www.ironcad.com/blog/ironcad-2018pu1.

Lakshmi Life Sciences Limited Customer Story

Lakshmi Life Sciences Limited (LLS), has been serving the industry for more than a decade under different names such as LTE, Quattro InfoTech.LLS is an associate Company of Lakshmi Machine Works Ltd (LMW), a leading Textile Machinery Manufacturer in India. LLS has a fully integrated plant having state-of-art 'Injection Moulding’ machines, New product design team for making its own lineage of products and Value Added Engineering services for existing products.

“The successful implementation of PTC Creo2.0 has significantly improved our Product design quality and reduced the work time with better efficiency”- S.Prabakaran-Plant Head

Initiatives:

LLS needed to produce error free design with minimum lead time for favouring the manufacturing department needs. Customer satisfaction by delivering High Quality products in a very short time.

Solution:

Performing the Design solution with Value added Golden Partner Adroitec through PTC Creo Parametric 2.0 and Mold Design Solution PTC Creo 2.0 is used for product design to check the manufacturing feasibility.

Results:

Reduced Product Design time by 20% through advanced Tools in PTC Creo 2.0 Easier Design Modification due to Late design changes and saves time Design Quality is increased. Error and rework is reduced by 25%.

New Creo releases

Did you catch the big announcement at this year’s LiveWorx? Starting in 2018, Creo will be moving to annual releases. Paul Sagar, PTC’s senior vice president of product management, broke the news earlier this year. Annual releases will benefit companies of every size. SMBs can get new features faster, while enterprise users can see how those new additions are working for everyone else before they implement them.

CAD segment senior vice president Brian Thompson says that moving to annual releases will allow PTC adapt to changes in the industry more quickly, which will be critical as the IoT and AR markets continue to grow and more companies move to subscription licensing. “As the interest in subscription expands, an annual release cycle allows us to deliver continuous value to our customers,” says Thompson. “The selection of Creo by companies of varying sizes and industries is a testament to the momentum in the market and the interest in the added capabilities PTC brings to the design process with IoT and AR.”

New Creo releases are scheduled to come out every March, starting with Creo 5 in March of 2018, Creo 6 in March of 2019, and Creo 7 in March of 2020.

Web Schedule May 2018

<style type="text/css">
table.tableizer-table {<br />font-size: 12px;<br />border: 1px solid #CCC;<br />font-family: Arial, Helvetica, sans-serif;<br />}<br />.tableizer-table td {<br />padding: 4px;<br />margin: 3px;<br />border: 1px solid #CCC;<br />}<br />.tableizer-table th {<br />background-color: #104E8B;<br />color: #FFF;<br />font-weight: bold;<br />}<br /></style>
<p style="text-align: center;"><strong><span style="color: #000080;">Webinar Training Sessions</span></strong></p>

<table class="tableizer-table">
<tbody>
<tr>
<td><strong>S.no</strong></td>
<td><strong>Date</strong></td>
<td><strong>Day</strong></td>
<td><strong>Time</strong></td>
<td><strong>Topic</strong></td>
<td><strong>Duration</strong></td>
</tr>
<tr>
<td>1</td>
<td>23-05-2018</td>
<td>Wednesday</td>
<td>11:00</td>
<td>Whats new in Creo 5.0 -update</td>
<td>45</td>
</tr>
<tr>
<td>2</td>
<td>30-05-2018</td>
<td>Wednesday</td>
<td>11:00</td>
<td>Creating and using Combined views</td>
<td>45</td>
</tr>
<tr>
<td>3</td>
<td>6/6/2018</td>
<td>Wednesday</td>
<td>11:00</td>
<td>Assembly process planning using Creo</td>
<td>45</td>
</tr>
<tr>
<td>4</td>
<td>13-06-2018</td>
<td>Wednesday</td>
<td>11:00</td>
<td>Whats new in IronCAD 2018</td>
<td>45</td>
</tr>
<tr>
<td>5</td>
<td>20-06-2018</td>
<td>Wednesday</td>
<td>11:00</td>
<td>Whats new in Creo 5.0 -update</td>
<td>45</td>
</tr>
<tr>
<td>6</td>
<td>27-06-2018</td>
<td>Wednesday</td>
<td>11:00</td>
<td>Creo Parametric Lite capabilities</td>
<td>45</td>
</tr>
</tbody>
</table>
<style type="text/css">
table.tableizer-table {<br /> font-size: 12px;<br /> border: 1px solid #CCC;<br /> font-family: Arial, Helvetica, sans-serif;<br /> }<br /> .tableizer-table td {<br /> padding: 4px;<br /> margin: 3px;<br /> border: 1px solid #CCC;<br /> }<br /> .tableizer-table th {<br /> background-color: #104E8B;<br /> color: #FFF;<br /> font-weight: bold;<br /> }<br /></style>
<p style="text-align: center;"><strong><span style="color: #000080;">Webinar Demo Sessions</span></strong></p>

<table class="tableizer-table">
<tbody>
<tr>
<td><strong>S.no</strong></td>
<td><strong>Date</strong></td>
<td><strong>Day</strong></td>
<td><strong>Time</strong></td>
<td><strong>Topic</strong></td>
<td><strong>Duration</strong></td>
</tr>
<tr>
<td>1</td>
<td>23-05-2018</td>
<td>Wednesday</td>
<td>15:00</td>
<td>Creo Parametric - Design validation Modules overview</td>
<td>45</td>
</tr>
<tr>
<td>2</td>
<td>30-05-2018</td>
<td>Wednesday</td>
<td>15:00</td>
<td>PTC Creo Applications overview</td>
<td>45</td>
</tr>
<tr>
<td>3</td>
<td>6/6/2018</td>
<td>Wednesday</td>
<td>15:00</td>
<td>Product illustration using Creo Illustration</td>
<td>45</td>
</tr>
<tr>
<td>4</td>
<td>13-06-2018</td>
<td>Wednesday</td>
<td>15:00</td>
<td>Creo Intelligent fasteners extension</td>
<td>45</td>
</tr>
<tr>
<td>5</td>
<td>20-06-2018</td>
<td>Wednesday</td>
<td>15:00</td>
<td>3D Harness design using Creo</td>
<td>45</td>
</tr>
<tr>
<td>6</td>
<td>27-06-2018</td>
<td>Wednesday</td>
<td>15:00</td>
<td>Creo Parametric - Design Modules overview</td>
<td>45</td>
</tr>
</tbody>
</table>

Participation in Subcon

We are participating at Subcon 2018 from May 23rd to 25th @ Codissia trade fair complex, Coimbatore ,Hall D Stall no 79

Web Schedule April 2018

Webinar Training Sessions

 

Sl No	Date	Day	Time	Topic	Duration
1	25-04-2018	Wednesday	11:00	Design automation using MathCAD	45
2	2/5/2018	Wednesday	11:00	Flexible editing using Creo parametric	45
3	9/5/2018	Wednesday	11:00	Whats new in IronCAD 2018	45
4	16-05-2018	Wednesday	11:00	Creo Parametric Lite capabilities	45
5	23-05-2018	Wednesday	11:00	Whats new in Creo 5.0 -update	45
6	30-05-2018	Wednesday	11:00	Creating and using Combined views	45

 

Webinar Demo Sessions

 

Sl No	Date	Day	Time	Topic	Duration
1	25-04-2018	Wednesday	15:00	Creo Aditive manufacturing	45
2	2/5/2018	Wednesday	15:00	Creo Parametric - Tooling and Manufacturing Overview	45
3	9/5/2018	Wednesday	15:00	What's new in Creo 5.0	45
4	16-05-2018	Wednesday	15:00	What's new in IC Draft 2018	45
5	23-05-2018	Wednesday	15:00	Creo Parametric - Design validation Modules overview	45
6	30-05-2018	Wednesday	15:00	PTC Creo Applications overview	45

One stop shop - Technical Knowledge Management

Growing difficulties associated with accessing and leveraging technical knowledge are rooted in several ongoing trends : Demographics, exodus of data coupled with pace of innovation and technical content being curated, managed and published by many information providers.

The ROI in Technical Knowledge Management platform described, comes in many dimensions, ranging from consolidated research spending and productivity gains by engineers, to faster new product introductions and increased use of information, greater market insights and reduced risk.  Read more

Creo Flow Analysis - Synopsis Demo

Creo Flow Analysis extension puts CFD in the hands of every engineer. As products become more complex and timelines shorten, you need a CFD solution that allows you to analyze shorten, you need a CFD solution that allows you to analyze liquid and gas flow early in your design process. With Creo FAE, you can reduce expensive hardware testing and gain unique insight into your products.

Corporate Training at its best

Adroitec Engineering Solutions have engaged students at KL University on a 3 day training program on "PROJECT MANAGEMENT USING PRIMAVERA 6". Feedback received from the training program was encouraging and they look forward to engage Adroitec in many such initiatives.

Primavera 6 deals with project management in all major industry domains like civil, mechanical and electrical. Professionals who are knowledgeable in project management skills and techniques can use Primavera to promote agility and productivity in organizations.
3 day Training program covered:
• Learn to manage multiple projects successfully
• Apply industry best practices in project management
• Fully appreciate the tools and techniques of Oracle Primavera
• Plan, control, and organize project activities
• Execute the project within time and budget constraints
• Assign roles and responsibilities and allocate resources
• Create relationships between tasks and work out project schedules
• Create reports that need to be shared with relevant people

Read more

Most intuitive BOM Intelligence solution

Solution targeted towards Electronics & Automotive industry, It requires lot of efforts and cumbersome process for Teams involved in Designing & Procurement of e-components to track:
# Obsolescence of Components,
# EoLs- Shrinking Components' Life cycle,
# PCNs - Part Change Notifications,
# get updated with global regulatory changes,
# Sourcing Components from countries,
# know components' compliance ,
# Comparing component manufacturers for your products ,
# insights about the market trends & your competitors technological trends

All this has been made hassle-free with this approach.

Implementation of Windchill across plants in AGI Glaspac

Business Impact:

New product development lead time reduced by almost 30%. In less than 3 weeks AGI
could make the concept a reality. Sales from New products grown significantly with increase in customers
satisfaction. As the hassle of releasing up to date drawings for manufacturing every time is taken away, Productivity increased from Design and development team.

The Challenge:

AGI started a new plant and the capacity almost doubled, obviously we needed to develop and market new products rapidly. With manual Enquiry process and release of drawings, the risk of delay and errors were very high, reworking of moulds re drawing samples were at a huge cost due to continuous process nature of Glass making , therefore we were looking to Automate enquiry and drive the entire product development cycle.

The Solution:

Windchill was a natural solution for us as we were already partners with PTC and Adroitec with Pro/E software for our CAD needs.

Implementation:

AGI implemented Windchill across plants. Enquiry process is automated and Marketing team can now generate enquiries from customers place and get online feedback and kick start product development and give approvals. Internal teams comprising Mould shop, Forming and quality get task to complete, with online access to latest drawings and 3D CAD data, practically scope of errors became zero.

IHS Engineering and Design Solutions

Adroitec is now partner for complete suite of Engineering and Design Solutions including Goldfire/Engineering Workbench (EWB), Parts and Standards

Standards, Codes & Specs

Industry's top management solution that connects entire enterprise to worlds largest collection of continuously updated largest engineering and technical reference documents. Read more

 

BOM Intelligence: Bill of Material Management Software

World’s first intuitive, automated bill-of-materials intelligence tool so you can meet production targets on time and within budget. Read more

 

Engineering Workbench -

Information overload" challenge with a single intuitive interface that uses advanced knowledge discovery technologies to surface answers from a curated universe of technical knowledge. Read more

ADROITEC Exhibits PLM Technology Trends to Academic Institutions

Our initiative to communicate the current technological trends adopted in industries to educational institutions concluded in a successful workshop on Product Lifecycle Management on Nov 30th, 2017.The workshop witnessed a great turnout of HOD , Professors and Assistant Professors from various colleges and universities who showed profound interest and enthusiasm in gaining insight on PLM.

The session kicked off with a brief introduction about PLM, the objective being to provide a comprehensive experience our workshop’s session significantly focused on imparting the knowledge through a complete hands-on experience. The participants got to experience PTC Windchill - PLM software that is being used by top manufacturing companies. To further enhance the experience, the following session on process automation enabled the participants to automate the business process management under the guidance of our experienced implementation consultants.


ADROITEC Exhibits PLM Technology Trends toW Academic Institutions


Our initiative to communicate the current technological trends adopted in industries to educational institutions concluded in a successful workshop on Product Lifecycle Management on Nov 30th, 2017. The workshop witnessed a great turnout of HOD, Professors and Assistant Professors from various colleges and universities who showed profound interest and enthusiasm in gaining insight on PLM.


The session kicked off with a brief introduction about PLM, the objective being to provide a comprehensive experience our workshop’s session significantly focused on imparting the knowledge through a complete hands-on experience. The participants got to experience PTC Windchill - PLM software that is being used by top manufacturing companies. To further enhance the experience, the following session on process automation enabled the participants to automate the business process management under the guidance of our experienced implementation consultants.


One of the engaging segments of the workshop was the demonstration of the new age digital technology, augmented reality that is changing the way how information is communicated. Finally, the event wrapped up with a talk on the career in PLM and the benefits of having a center of excellence for the students.


This workshop on PLM was very much appreciated by the professors who participated leaving them inspired and wanting to share this hands-on experience with their students. Likewise, we are looking forward to technologically inspire for transforming students into successful engineers.

Behind the Scenes: The Markforged Print Farm

At Markforged, we are leveraging key features of our highly reliable and integrated system to scale manufacturing of sample parts. Our internal “print farm” functions as an efficient and easily implementable 3D printing factory. For more details click here 

Corporate Training at its best

Adroitec Engineering Solutions operates with a vision to provide high-Quality training to its corporate clients through innovative and pioneering process. Adroitec offers advantage of the cost-effective convenience of on-site corporate training and you can get your team the training they need without requiring them to sacrifice project schedules. For more details click here

PTC Creo Augmented Reality

Picture an immersive design review where you could experience your product at scale, one,where single click summoned a 3D representation of your product. Then you explain your ideas to others more easily and find issues- or opportunities- earlier in the design process. And go on to share your design with anyone in the world.
Augmented Reality (AR) , is engaging , immersive and simple. PTC  has integrated Creo with Vuforia , their  world-leading AR platform , so you can author and publish an AR experience right from Creo with a few Clicks.
No Programming Skills needed. For more detail click here

Windchill to Serve as Digitization Backbone for Global Vehicle Production

NEEDHAM, Mass. – January 17, 2018 –– PTC (NASDAQ: PTC) today announced the BMW Group has selected the PTC Windchill® solution as its PLM backbone for production and sourcing bill-of-material (BOM).Windchill will be the enabler for globally configuring and releasing cars to production.The award-winning PLM solution will support BMW Group in improving efficiency and achieving a leaner global production planning process. In addition, BMW Group has selected the ThingWorx® NavigateTM role-based solution for fast and easy ecosystem access to product data. Both solutions are being obtained through the subscription licensing model .

HP launches 3D printers in India - Selects ADROITEC as its Partner

“We believe that digital transformation of manufacturing will be a key enabler of the next industrial revolution,” said Sumeer Chandra, Managing Director, HP India.

HP also announced Imaginarium and Adroitec as resellers of its 3D printing solution in the country who are expected to be part of customer deployments to enablement of new applications.

“3D printing will contribute to democratising manufacturing and transforming industries, including the $6 trillion Asia-Pacific and Japan manufacturing segment. India is a strategic hub for this significant shift and we are excited to bring the cutting-edge Multi Jet Fusion technology to Indian customers across a variety of vertical markets,” added Chandra.

According to HP, ‘MJF 3D printing solution is a production-ready commercial 3D printing system that is said to deliver superior-quality physical parts up to 10 times faster and at half the cost of current 3D printing systems.’

“India’s strength in value-added engineering, supported by the Government’s push on local manufacturing and adoption of digital technologies, HP is also said to be driving the expansion of 3D printing materials and helping lower costs with its ‘Open Platform’ for materials development. The Open Materials Platform approach has more than 50 companies actively engaged, including Arkema, BASF, Dow Chemical, Dressler, DSM, Evonik, Henkel, Lehmann & Voss, Lubrizol and Sinopec Yanshan Petrochemical Company. presents an opportunity for India to benefit from Industry 4.0 transformation,” said Chandra. “HP has been committed to creating technology that advances lives and businesses across India. With HP’s MJF 3D printing solution, we will support India’s transformation and enable local businesses to adopt best-in-class manufacturing technologies,” he added.

Unlocking the Potential of Industries 4.0

Real time understanding into their operations. PTC has positioned itself to help companies realize the potential of Industries 4.0.

Web Schedule March 2018

Webinar Training Sessions

S.No	Date	Day	Time	Topic	Duration
1	07.03.18	Wednesday	11:00	Assembly process planning using Creo	45
2	14.03.18	Wednesday	11:00	Simplified representations and Exploded views	45
3	21.03.18	Wednesday	11:00	Flexible editing using Creo parametric	45

Web Schedule February 2018

Webinar Training Sessions

S.No	Date	Day	Time	Topic	Duration
1	01.02.18	Wednesday	11:00	Creo - Mastering the configuration files	45
2	07.02.18	Wednesday	11:00	Design automation using MathCAD	45
3	14.02.18	Wednesday	11:00	Integration of Excel to Creo parametric	45

Web Schedule January 2018

Webinar Training Sessions

S.No	Date	Day	Time	Topic	Duration
1	10.01.18	Wednesday	11:00	Creo Parametric Lite capabilities	45
2	18.01.18	Thursday	11:00	Flexible editing using Creo parametric	45
4	24.01.18	Thursday	11:00	Flexible editing using Creo parametric	45

Corporate Training

Adroitec Engineering Solutions operates with a vision to provide high-Quality training to its corporate clients through innovative and pioneering process.

RAAW: A New Take on the Mountain Bike

German language magazine, Prime Mountain Bike, recently published a story about the RAAW Madonna, an aluminum-frame enduro bike, meant to perform on rugged terrain.

Here are few excerpts:

Ruben Torenbeek is the man behind the RAAW brand, which he founded in 2016. Innovative ideas, a simple yet elegant design and a thoroughly thought-out design, make his RAAW Madonna come to life.

The RAAW Brand 

After seven years of experience as a bike engineer and designer in the wheel industry, Torenbeek took the helm of the company. In his opinion, the wheel industry has focused on developing great revolutionary ideas. But has neglected the optimization of existing achievements.

With the most advanced hydroforming technology, RAAW seeks to show what is possible with aluminum. The company creates 3D CAD models with Creo Parametric software, to get the perfect maximum out of the aluminum frame construction. Modern forging, milling, and hydrforming technology creates a technical look with an independent design and an S-shaped lower tube.

The RAAW Madonna

In the development of the Madonna, the focus was on achieving trail bests and at the same time creating a long-lasting design and uncompromising functionality down to the smallest detail. The harder the trail, the higher speeds the Madonna should allow. But it should also offer the highest possible efficiency. Read the whole article here.

Top Seven Reasons to Choose PTC Creo

If you’re ready to move to the next level, you’re ready for Creo. It's the industry’s leading 3D CAD software, helping you create great digital prototypes for more than 30 years. Download this free eBook to learn how Creo helps you create your best products reliably, on budget, and on time.

PTC is a leader in PLM for discrete manufacturers

PTC Named a Leader in PLM Solutions for Discrete Manufacturing PTC comes out ahead in Forrester’s 20-criteria evaluation of PLM solution providers.Among seven evaluated providers, PTC’s Windchill 11 was top-ranked in the current offering category.

“PTC is a great choice for discrete manufacturers looking for an involved vendor with IoT capabilities that can get their PLM solution up and running quickly and flexibly.” For more details read the pdf

HBR Augmented Reality Experience by PTC

"Why Every Organization Needs an Augmented Reality Strategy,” by Michael Porter and PTC's James Heppelmann  includes an AR companion app to illustrate the article's concepts. Check  out  the  AR experience from the HBR magazine.